CyberGate_v3.4.2.2 Cracked by The Old Warrior

Setting Up No-IP

1. Go to http://www.No-ip.com

2. Create an account, confirm your account through your email, then log in. Click Add Host.

3. Now name your host whatever you want. For example I will name my host jakeekaj.servegame.com. Just follow these settings and press Create Host.

4. Now go here - https://www.no-ip.com/downloads.php and download No-IP's Dynamic DNS Update Client if you haven't already.

5. Once downloaded, install it. Then open it up and put in your account email and password.

6. Click Select Hosts - Click the box to check mark your host - Then press Save.

It should look something like this:

7. Click the X in the top right corner to minimize No-IP to your taskbar.

You are now finished setting up No-IP![/spoiler]



Setting Up CyberGate

1. You can either buy CyberGate Personal Edition or download CyberGate 3.4.2.2 Cracked by The Old Warrior. I'm using the cracked version and yes the cracked version is clean if you download it from the right place...

2. Now click Control - Start and then Tools - Settings. Delete port 999 then do the following:

You are now done with setting up CyberGate!




Building Your CyberGate Server

1. Click Tools - New Server - Stealth. Make a user named Hacker and press Ok.

2. Mark the user "Hacker" And press Forward.

3. Press 127.0.0.1 | Port 999 and press Delete:

4. After that, Click Add.

5. A Box should pop up saying: 127.0.0.1:81. Remove everything and change it with the No-ip address host you added. So let's say you used example.servegame.com. Change 127.0.0.1:81 to example.servegame.com:82. So it should look like this:

6. Now Change the
Identification: remote
Password: cybergate

To This:
Identification: Cyber
Password: 123456

7. Go to the next tab "Installation" and use the exact same settings as i do (PS: If you use these settings and plan on crypting you server, don't turn on Persistence, Injection, or Startup on your crypter. Since we already have them turned on from CyberGate):

8. Now Skip the Message, Keylogger, and Anti Debug tabs (if you want to test your server on yourself in a virtual sandbox turn off all Anti Debug checkmarks), since these are already set up right for us.

9. In the Create Server tab just press create and save your server and settings.

You are now done creating you server!




Forwarding Your Ports, If You Have Not Done So

Your now going to have to forward port 82 on your router if you have not done so, this is how:

1. Click Start on your computer and click Run. If you have Vista/Windows 7 click start and click in the search bar.

2. Type cmd and hit enter.

3. type ipconfig and press enter.

4. You should see something like this, write down or remember these last digits that I selected in the picture below:

5. Now go to http://www.portforward.com

6. Scroll down and select your router.

7. Scroll down and you should see a bunch of programs, click "1st SMTP Server"

8. You should see at the top telling you to enter your static IP

9. Type in the digits I had you remember in step 4. My digits were 114 so I entered that.

10. Now just follow the tutorial, but when it says forward port 25, forward port 82 instead.

11. Once you are done, go to http://www.canyouseeme.org

12. Type in 82 in the box next to "What Port?" and click check.

13. If you got "Error: I could not see your service on IP ADDRESS HERE on port (82) Reason: Connection refused" Make sure your firewall is off and try again.

14. You should get "Success: I can see your service on ADDRESS HERE on port (82) Your ISP is not blocking port 82"

Port 82 should now be open!