I9082XXUBMGA_I9082OXEBMGA_SER.zip

seeders: 0
leechers: 1
Added on October 15, 2013 by rushalnaikin Applications > Android
Torrent verified.



I9082XXUBMGA_I9082OXEBMGA_SER.zip (Size: 905.46 MB)
 I9082XXUBMGA_I9082OXEBMGA_SER.zip905.46 MB


Description

How to Update Samusng Galaxy Grand I9082 with latest official Android 4.2.2 Jelly Bean firmware.
1>Firstly, UNZIP Galaxy Grand I9082 XXUBMHD firmware on your PC.

2>Download ODIN from here save it in the PC, unzip and install it.

3>Now, launch the Odin app on the PC.

4>Power off the phone, and make sure it is complete turned off. A vibration will confirm the turn off completely process.

5>Boot it into Download Mode menu, to do this press and keep holding the home, power and volume down buttons simultaneous.

6>Connect the Android device to the PC, using the USB cable.

7>Odin has to recognize the Galaxy Grand smartphone and the ID:COM will turn blue or yellow plus the “added” message will be displayed into ODIN interface.
If the ODIN didn’t recognize the phone and the added message isn’t displayed, then disconnect the smartphone from the PC, close the ODIN, and reinstall the USB drivers once again, then retry the step by step guide from the beginning.

8>Now, click the “PDA” button from ODIN.

9> Browse and pick the extracted download firmware file.

10>Click on START from ODIN.
Don’t make any changes, only wait ODIN to finish the flash process.
Once the installation process is done, a “pass” message will be displayed on the ODIN and the ID:COM will turn green.
Now, disconnect the device from PC.

11>Reboot the device.

Congratulation, now you’ve successfully learned how manually installs the new Android 4.2.2 Jelly Bean official XXUBMHD into Samsung Galaxy Grand I9082 device.

Troubleshooting:

If the device will enter into a boot loop at the first boot on the new firmware, you have to :
Reboot the device into recovery mode
From the Recovery Mode select “wipe data factory reset” and “wipe cache partition”.
Reboot the device.
If the ODIN app gets stuck during the step by step guide, you have to:
Close the ODIN
Disconnect the device from the PC.
Force to restart the device.
Re-install once again the Galaxy Grand USB drivers and repeat the procedure from the beginning.
For any other supplementary questions or issues, please don’t hesitate to put them in our comment section from below.

image
PLZZ SEEEEEEEEEEEEED..!!!!

Sharing Widget


Download torrent
905.46 MB
seeders:0
leechers:1
I9082XXUBMGA_I9082OXEBMGA_SER.zip