KMSAuto Net Windows 8.1 All Activator (101% Working) By ~ Niksick

KMSAuto Net 2014 Portable by Ratiborus,
MSFree Inc.

Description:
—————————————————————————————————
KMSAuto Net - the automatic KMS solution to activte the following operating systems
Windows Vista, 7, 8, 8.1, Server 2008, 2008 R2, 2012, 2012 R2 VL and Retail
also for Office 2010, 2013 VL editions.
Additionally, the program activates:
Windows 8.1 Single Language;
Windows 8.1 Core;
Windows 8.1 Core N;
Windows 8.1 Pro WMC;
Windows Embedded 8.1 Industry Pro;
Windows Server 2012 R2 Standard;
Windows Server 2012 R2 Datacenter.
It is based on KMS Server Service from mikmik38 (MDL).


Using the program:
—————————————————————————————————
Run KMSAuto Net.exe as administrator and use the interface. If you need additional
program features, enter into Professional Mode. The On/Off Professional Mode button
is placed in the "About" Tab.
The easiest way to use the program is to pick the automatic mode. All you need to do is
click on the button if you want to activate and agree to create a scheduled task for
reactivation by pressing the button.

Tip: First you need to activate Windows and Office in manual mode, and only then,
when you are sure that the activation takes place, you can create a scheduled task for
reactivation products every 25 days.
If the system does not want to be activated in Professional Mode go to "Utilites" and
manually set GVLK key for the proper Windows Edition, and then try to activate again.

Additional Information:
—————————————————————————————————

To activate Windows 8.1 the TAP network adapter must be installed directly
and use the IP address 10.3.0.2-254 or use a special driver. All these features
are built into the program.
To activate via LAN, the TAP interface can't be used to install and
activate through an address of a computer in the network.
If you reconfigure the program and it stops operating correctly - check the checkbox
"Reset the program." All settings will be set by default.


Additional parameters of the program (switches):
—————————————————————————————————
/win=act - Run this program in quiet mode, activate Windows
and exit the program.
/off=act - Run this program in quiet mode, activate Office
and exit the program.
/log=yes - Run this program in quiet mode, create a file ActStatus.log
and exit the program.
/kmsset=yes - Run this program in quiet mode, install KMS-Service and exit the program.
It's only for KMS-Service, without TAP, WinDivert, Hook.
/kmsdel=yes - Run this program in quiet mode, remove KMS-Service and exit the program.
/key=yes - Run this program in quiet mode, install the Windows key and exit
the program.
/task=yes - Run this program in quiet mode, create a scheduled task for Windows and
Office Activation every 25 days and quit.
/taskrun=yes - Run this program in quiet mode, run the task scheduler for Windows and
Office Activation and exit the program.
/convert= - Run this program in quiet mode, preparation to perform the conversion
of Windows version and exit the program.
Possible key values: win81pro, win81ent, win81, win81sl, win81wmc
After using this function, you need to restart your computer.

—————————————————————————————————
The activation will be done with the settings defined in the tab KMS-Service.


—————————————————————————————————
When you transfer the program to another computer, you need to reset the Auto Mode.
Activation would still be in automatic, but the mode may not be optimal
for your new computer.
To reset the auto mode to the initial state you need to switch to any other mode,
and then again select auto. Everything is now reset to the initial state.

About how to activate the built-in program
—————————————————————————————————
The program can perform the activation with built-in KMS server Emulator in several
different ways. Why are there several of them?: the standard way to connect to the activation server
through the local host (127.0.0.2-254) was blocked in Windows 8.1.
All methods are intended for activation of something to cheat the system, do so
that it "thinks" that the KMS server is not on your computer, but somewhere far away in the network.


Overview about the operating modes of the program:
—————————————————————————————————
Auto - the program tries to automatically find the way that best suits your activation
           system. Attempts are being made to activate the system or Office for all admissible
           ways your system has, and the one picked by the program it will be held to remember.
           To reset to the initial mode, you can switch to any other mode and then select Auto.
This mode is selected by default.
Hook - method based on the substitution of the original file system changed on a special way.
           The new version of the method works without physically replacing the file.
WinDivert- in the system a driver is installed at the time of activation and it keeps running
to emulate a remote connection to the KMS server.
NoAuto - In this mode, there is no automation, there is need to set the way it will work.
           Is intended for people who know better than me what, how and when to do and whether
you want to do it or not. :)
TAP - the system is a virtual device. TAP activation is done through this virtual device.
The program includes two drivers for the TAP adapter. If you already installed one of
the drivers, the program will used the other driver to activate, resulting in your
current adapter left intact.
* Mode names on the System tab - clicking these links on which you can change some settings.

KMSSS.exe Options
—————————————————————————————————
Command Line Parameters:
-Port - KMS Port. Range from 1 to 65535
-PWin - Windows PID
-PO14 - Office 2010 PID
-PO15 - Office 2013 PID
-AI - Activation Interval. Range from 15 to 43200 minutes
-RI - Renewal Interval. Range from 15 to 43200 minutes
KillProcessOnPort - Force to open the KMS Port if this is present.
-Log - Log file Enabled.
-IP - Show IP address Clients Computers.
-IPFiltrOFF - No IP Filters.
-Hwid - Machine Hardware Hash.

—————————————————————————————————
The program requires .NET Framework 4.5
To run properly, it is necessary to add the file KMSSS.exe in the exclusion of your Anti-Virus!.
Or disable Anti-Virus at the time of activation.

Sometimes KMS-Service is not installed properly, it may be for different reasons.
You need to perform 2-3 times "Removing KMS-Service" and restart your computer.
When working with the program it makes sense to check on the option "Save
settings in the program folder". In this case, the configuration file will be stored
in the program folder, and not in the C:UsersusernameAppDataLocalMSfree Inc.

—————————————————————————————————
I want to say thank you mikmik38, without his work this program would be just impossible.
To Hotbird64, for his KMS Client, Evgeny972 and guys from forum.ru-board.com for making
possible assistance and testing of multiple versions of the program.

Ratiborus


Changelog:
v1.2.3
-Activation functions are optimized for Windows and Office.
-Fixed minor bugs.
-Changed the "Utilities" tab. Added "KMS Client by Hotbird64"
-New KMSSS.exe supporting installation Hwid KMS-Server.

v1.2.2
-Fixed date and time displayed in hexadecimal format in the log file.

v1.2.1
-Added the utility from ShowHideControls miXOnIN. To convert Systems Editions.
-In Professional Mode, Advanced tab, the button "Convert Office RETAIL to VL".
  Runs on Windows 8-8.1, doesn't work on Windows 7!.
-New KMSSS.exe supporting installation Hwid KMS-Server.

v1.2.0
-Changed the "Settings" tab.

v1.1.9.b1
-Updated program for ProduKey v1.62 v1.65
-Added the choice of Activation intervals of 10 and 20 days.
-Installing GVLK Key at "Utilities" tab, works through slmgr.vbs.
-Changed setting keys function for "Unsupported Product" (so reports WMI OS).
-Added the program KMS Log Analyzer, for easy viewing and conservation of
information of the log file from KMS-Service. The computer must have installed
  an application for working with files .xlsm (MS Excel). Not ready yet!

v1.1.7 ÷ v1.1.8
-Small changes in the program interface. Added a link to a video.
-In "Auto" mode the program starts searching for a solution with the correct IP address.
-Fixed a rarely occurring bug related to the inability to delete files "Injector by deagles".
Program could hang with the message "Installation Hook, Injector by deagles"
-Activation functions are optimized for Windows and Office.
-On the Utilities tab a button was added "Resetting the system is not valid."
  Carefully read the message that appears when you click on this button!

v1.1.6
-Added the ability to reset the program to default values.
-New containers for modules. Unpacking modules and drivers is faster.
-Task scheduler creates tasks on behalf of the Administrator.
-Deleting addresses from KMS Server is working correctly.
-Fixed some minor bugs.
*** Happy New Year 2014 ! ***

v1.1.4
-Program settings can be saved in a folder containing the program.
-All modules of the program can work from ProgramData or the folder containing the program.
-Fixed minor bugs.

v1.1.2.b8
-ProduKey program is integrated into the executable file.

v1.1.2.b7
-Fixed bug accessing the folder.

v1.1.2.b6
-Fixed a bug in the Scheduler.

v1.1.2.b4
-In Auto mode, you can disable any method of activation.

v1.1.2.b3
-Hook method uses a modified SECO Injector. Works at Activation and Renewal intervals
and set own ePID.

v1.1.2b2
-Option to connect to the KMS server where Hook mode works without replacing files.
-Added option in the task scheduler to create the task in the ProgramDataKMSAutoS path.

v1.1.1
-Added activation method with temporary substitution of 8.1 files.

v1.0.9.1
-Eliminating annoying bug with non-removed service TunMirror.

v1.0.9
-Program requires .NET Framework 4.5 again, as per users request.
-Dialog to change the product key appears only once per session with the program.
-When the scheduled task executes, the KMS-Service is no longer removed from the system,
  if it was installed the first time.
-New added NoAuto option to disable automatic loading KMS-Service during activation.
Hence, if NoAuto then full NoAuto.
-In Auto mode when the configuration switch is added, the analysis of the
  system will always begin from the start position, and not from the previously stored.
  This is convenient if the program is run on different computers.
-Before activating the system editon is defined and if it is 8.1 then the classic way
  of local host activation is excluded.
-Added a second type of TAP adapter to resolve the conflict with the already established TAP VPN.
-WinDivert v1.1 has been applied, so not "incidents" result in BSOD on x86 systems.
-Eliminate errors when in the file path a sign "&" (ampersand) is present.

v1.0.8
-Added a setting to remove the WinDivert driver. To avoid a possible crashing of your
system in a BSOD, the unconditional removal can be turned on.
By default, the removal is made after reboot.
-Added the ability to run the program with switches at the command line.

v1.0.8.b5
-The program combines three ways to connect to the KMS server, first try automatic mode
  setting.

v1.0.7
-New KMS Server Service (KMSSS.exe). Added function to display the IP
address of the client in the log file. More in KMSSS.txt

v1.0.6
-New KMS Server Service (KMSSS.exe). More in KMSSS.txt
-Cosmetic changes to the interface

v1.0.5
-Log file that includes information about de client OS version.
-Fixes the problem with the definition of a folder Sysnative.

v1.0.4
-New KMSSS.exe, KMS Server Service.
-KMS Service Log output in the specified folder.
-Fixed some minor bugs :)

v1.0.3
-Applied a modified KMS-Service. Allows for the use of each product your own ePID.
Including CSVLK from actual key.
-Changed the installation and removal of TunMirror.
-Changed the installation and removal of TAP interface.
-Added support for activation of Core, Embedded Industry, Single Language, etc.

v1.0.2
-Change the setting of TAP interface.
-New feature for activation Backup / Restore.
-Cosmetic changes to the interface.
-Added the ability to create a task scheduler to activate.

v1.0.1
-Added GVLK keys to Server R2.
-Cosmetic changes to the interface.

v1.0.0
-First release.