Samsung Galaxy S4 LTE - I9505XXUHOD7 - EVR [Stock - 2015.06]

ROM: I9505XXUHOD7
Release: 20150514091037
Region: EVR [Everywhere]
Branded: No
Size: 2.46 GB
ROM for: I9505 (only)
Official/Stock ROM: Yes
Android version: 5.0.1 (Lollipop)




Install the Galaxy S4 USB driver
Install the USB Driver first to get rid of flashing failures. You may also need to extract the downloaded file which is packed in zip or rar files, so that you’ll get the tar.md5 file.

Run and Configure Odin
Run Odin downloader Odin3_v3.09 on your PC desktop. Watch out the check-boxes options on the right top of Odin, ensure that the ‘Phone Bootloader Update’ (only if your device runs on 4.3) , ‘AUTO-REBOOT’ and ‘F.RESET TIME’ checkboxes must be checked. Only the ‘RE-PARTITION’ is unchecked.

Reboot your Galaxy S4 (I9505) into Download Mode
To reboot the Galaxy S4 into download mode , you need to turn the power off. After it completely shut off, just press and hold the Volume Down key, Home button and the Power ON/OFF button simultaneously.

You should then prompted into a warning screen and asking you to press volume up if you want to continue or volume down to cancel, just simply press volume up to get into download mode. The download mode then displays an Android robot and say’s “Downloading.. Do not turn off target!!”

Connect your Phone to PC or Laptop
Once you already reboot the phone in download mode, simply connect the phone to your PC or laptop USB.
In Odin window – the ID:COM box will turn to blue color and indicates the COM port numberand a word “Added” on a log box will prompt you that the device is already detected or recognized by Odin. Your COM port number might be different from mine. If you do not see a COM port number then there’s something missing or wrong. You may read again from the top of this post.

Load the stock I9505XXUGNG8 4.4.2 Android KitKat firmware file
The stock firmware is pack in a single .tar.md5 file only. Now, you need to just simply click on the AP button, then browse to the folder where the file you have previously extracted and then select and load it.
“I9505XXUGNG8_I9505OXEGNG1_I9505XXUGNG8_HOME.tar″

Start Flashing or Installing the stock firmware
Once if all set and ready to fire-up, hit the “START” button in Odin to begin flashing the stock ROM.
Do not ever interrupt the phone while already in flashing progress, like disconnecting the cableor turning off the device. Just wait until it completely finish.

Wait ’till it PASS!!
When the Stock Firmware installation successfully completes, you will then see a word “PASS” in Odin. This indicates that the flashing was already finish, and on the log box it says “All threads completed (succeed 1 / failed 0)”. The phone will just then automatically reboot, then it’s about time to remove it from PC or laptop USB connection.

Confirm if you successfully installed the stock firmware
Confirm your fresh firmware installed by typing *#1234# or
Go to Settings>About Phone>Firmware info.
You can also do factory reset by dialing *2767*3855#.

Possible errors that you may encountered, this is based on my own experience while flashing stock firmware on Samsung Android devices. These are just a few hints on how to resolved it.


Click HERE to see my uploads