The Bridge 1959 CC Bluray 1080p DTS-HD-1 0 x264-Grym

The.Bridge.1959.CC.Bluray.1080p.DTS-HD-1.0.x264-Grym.mkv


Original Title: Die Brücke


In 1945, Germany is being overrun, and nobody is left to fight but teenagers.


Director..........: Bernhard Wicki

Writers...........: Manfred Gregor (Novel), Michael Mansfeld &
Karl-Wilhelm Vivier

Starring..........: Folker Bohnet, Fritz Wepper, Michael Hinz


iMDB URL..........: http://www.imdb.com/title/tt0052654
SOURCE TYPE.......: Retail Blu-Ray 28,1 GB Movie @ 34996 kbps / 42,0 GB Full
ViDEO SPECS.......: x264 2PASS @ 14000+ Kbps (High@L4.1) - 23.976 fps
AUDiO SPECS.......: German DTS-HD Master 1.0 1034 kbps 48 kHz 24 bit
RUNTiME...........: 1h 43 min
MOViE CROPPED.....: No
FiLM ASPECT RATiO.: 1.37:1
RESOLUTiON........: 1920 X 1080p
EXTRAS............: Yes - 1,30 GB
SUBTiTLES.........: English
SUBTiTLES EXTRAS..: English


NOTE: The Mono LPCM 1.0 audio Converted to Lossless DTS-HD Master audio.


-----------------------------------------------------------------------------------
Grym's mkv's are encoded in 1920x1080 res. @ 2.35:1, 1.85:1, 1.66:1, 1.33:1 film aspect ratio. Just like a retail Blu-Ray is. This will NEVER change, so don't ask!
-----------------------------------------------------------------------------------


1. Click link below for Guide to help setting up OS, MPC-HC & LAV Filters for
Bit Streaming to HD-Receiver & MAD VR, as well!

http://www.avsforum.com/foru...nced-mpc-hc-setup-guide.html

2. So how can I watch your not cropped x264 rip in the so-called 2.35:1
Anamorphic/Letterbox image, mate?

---

For starters we have Film Aspect Ratio = Letterbox, CinemaScope, PanaVision etc. =
2.35:1, 1.85:1, 1.66:1, 1.33:1 ect. Film Aspect Ratio is the ratio of the width
of the visible area of the video/film frame to the height of the visible area,
measuring from a 4:3 TV Display. All the Cinematic Aspect Ratios/Framings
mentioned just above apply to the HD resolutions 1080p (NOT 800p) and 720p (NOT
544p) and to the standard resolutions as well, being the DVD resolutions 720x576p
(PAL) & 640x480p (NTSC).

Then we have the "black bars". These areas are black to allow for better
contrast. The wrongly called "black bars" is in fact part of the image! So if any
part of the black unused areas is cropped/cut of the image then the original
aspect/scope/letterbox ratio is lost! That goes for all BD/DVD resolutions.

I know that a Blu-Ray player cannot playback anamorphic/letterbox material like
the DVD player can, but the anamorphic/letterbox/Framing/Aspect Ratio scope is
still in the transfer/encode, so for this to work you have to rip the Blu-Ray
disc to PC, and play it back anamorphic/letterbox from PC. Or you can grab one of
Grym's uncropped x264 rips and use that for anamorphic/letterbox playback from PC.

You can set a DVD player & also HD Box's to Display Aspect Ratio setting 4:3 and
receive correct aspect ratio/framing (Not all HD Box's apply). All the 16:9
setting in a DVD & Blu-Ray player or HD Box do, is to crop the image. That's it.

You can watch the movie in original 2.35:1 anamorphic/letterbox scope,
like you do in the theater, by setting the aspect ratio in your software player
to 2.35:1.

Example:

Open a 2.35:1 Grym mkv encode or retail BD 2.35:1 m2ts file in MPC-HC. Right
click in center of MPC-HC screen. Choose 'Video Frame'. Choose 'Override Aspect
Ratio'. Choose '235:100' (2.35:1). Display Aspect Ratio setting on your 16:9 flat
screen you set to 1:1 pixel mapping or whatever the name is on your telly. On my
own Pioneer Kuro LX5090H 16:9 flat TV it's called Dot by Dot. Now play mkv.

Ok, now try using same playback procedure with a cropped so-called "2.35:1"
1920x800 rip/file. 1920x800 cannot be 2.35:1 on a tv screen (Where it Counts),
because The Cinematic Aspect Ratios has nothing to do with Resolution! Aspect
Ratio is a Framing tool for images in the cinema business. So it's impossible to
get a correct 2.35:1 framed image on a correct set tv screen when the resolution
is cropped to 1920x800, because now the image has been manipulated to a 1.85:1
framing simply because part of the black areas are cropped of.

If you want to watch 1.85:1 aspect ratio movies in the correct aspect ratio
you then set the aspect ratio to 2.35:1 as well, and the image will have the
"small" black bars.

Cinematic Aspect Ratios on 16:9 flat TV: Display Aspect Ratio setting on TV set
to 1:1 pixel mapping and resolution is 1080p. Resolution could also be 720p, 480p
or 576p, the Framing/Aspect Ratio would be the same:

1.33:1 - Black bars on all sides of image (4:3) - Aka 1.37:1 Academy Standard
Image: http://someimage.com/rLrxESc

1.66:1 - Black bars on all sides of image (Small L+R) - Movies
Image: http://someimage.com/1ck9wcT

1.78:1 - Full screen. Image fills whole of screen (16:9) - HDTV & Home Video
Image: http://someimage.com/BqgDoMB

1.85:1 - Black bars Top & Bottom of image (Small) - Movies, HDTV & Home Video
Image: http://someimage.com/90ZxXoJ

2.35:1 - Black bars Top & Bottom of image (Big) - Aka 2.40:1 & Anamorphic Scope
Image: http://someimage.com/ll7hnDY

2.35:1 on a theater screen: http://someimage.com/aopL0DM

Links:

http://www.widescreen.org/index.shtml

http://en.wikipedia.org/wiki/Letterboxing_(filming)


(-G-)