Lynda.com - Inventor 2014 Essential Training (Updated) {AceMerlin}

seeders: 11

leechers: 11

Download torrent

Added on May 19, 2014 by AceMerlinin Other > Tutorials
Torrent verified.

Main
Comments

add to bookmarks

Lynda.com - Inventor 2014 Essential Training (Updated) {AceMerlin} (Size: 1.56 GB)

		142115_00_01_WX30_Welcome-2014-05-19-17-27-43.mp4	4.45 MB
		142115_00_02_3D15_ExerciseFiles-2014-05-19-17-27-46.mp4	1.36 MB
		142115_01_02_3D15_ReviewingDifferentFileTypes-2014-05-19-17-27-51.mp4	9.56 MB
		142115_01_01_XR15_MajorWorflowSteps-2014-05-19-17-27-49.mp4	5.12 MB
		142115_02_02_3D15_NavigationTools-2014-05-19-17-27-57.mp4	18.16 MB
		142115_02_01_3D15_NavigationViewcube-2014-05-19-17-27-54.mp4	15.41 MB
		142115_02_06_3D15_MarkingMenu-2014-05-19-17-28-08.mp4	13.88 MB
		142115_02_03_3D15_UsingtheBrowser-2014-05-19-17-28-00.mp4	10.78 MB
		142115_02_04_3D15_Usingtheribbon_bar-2014-05-19-17-28-03.mp4	8 MB
		142115_02_05_3D15_QuickAccessToolbar-2014-05-19-17-28-05.mp4	2.29 MB
		142115_03_02_3D15_CustomRibbonPanels-2014-05-19-17-28-15.mp4	19.98 MB
		142115_03_01_3D15_MenuCustomization-2014-05-19-17-28-12.mp4	19.05 MB
		142115_03_03_3D15_KeyboardCustomization-2014-05-19-17-28-17.mp4	15.24 MB
		142115_03_04_3D15_MarkingMenuCustomization-2014-05-19-17-28-20.mp4	12.68 MB
		142115_04_03_3D15_Project_File_Creation-2014-05-19-17-29-43.mp4	17.34 MB
		142115_04_04_3D15_Project_File_Course-2014-05-19-17-29-46.mp4	14.44 MB
		142115_04_02_3D15_Project_File_Settings-2014-05-19-17-29-40.mp4	10.42 MB
		142115_04_01_3D15_Project_File_Introduction-2014-05-19-17-29-36.mp4	9.99 MB
		142115_05_03_3D15_Understanding_Constraints-2014-05-19-17-29-57.mp4	21.47 MB
		142115_05_04_3D15_Sketch_Application_Options-2014-05-19-17-30-00.mp4	13.61 MB
		142115_05_01_3D15_Introducing_Sketching-2014-05-19-17-29-50.mp4	12.73 MB
		142115_05_02_3D15_Understanding_Origin_Geometry-2014-05-19-17-29-53.mp4	12.61 MB
		142115_06_02_3D15_Drawing_Arcs_Rectangles-2014-05-19-17-30-06.mp4	25.32 MB
		142115_06_06_3D15_Dimensioning-2014-05-19-17-30-16.mp4	24.47 MB
		142115_06_03_3D15_Creating_Splines-2014-05-19-17-30-09.mp4	18.54 MB
		142115_06_04_3D15_Creating_Slots-2014-05-19-17-30-11.mp4	18.35 MB
		142115_06_07_3D15_Parameters-2014-05-19-17-30-20.mp4	17.35 MB
		142115_06_05_3D15_Construction_Geometry-2014-05-19-17-30-13.mp4	16.55 MB
		142115_06_01_3D15_Drawing_lines-2014-05-19-17-30-02.mp4	16.44 MB
		142115_07_04_3D15_Sketch_Patterns-2014-05-19-17-31-29.mp4	24.97 MB
		142115_07_03_3D15_Scale_Stretch_Offset-2014-05-19-17-31-27.mp4	18.85 MB
		142115_07_01_3D15_Move_Copy_Rotate-2014-05-19-17-31-21.mp4	18.51 MB
		142115_07_02_3D15_Trim_Extend_Split-2014-05-19-17-31-25.mp4	16.44 MB
		142115_08_03_3D15_Work_Planes-2014-05-19-17-31-39.mp4	19.57 MB
		142115_08_01_3D15_IntroductiontoWorkFeatures-2014-05-19-17-31-33.mp4	11.77 MB
		142115_08_04_3D15_Work_Axis_Point-2014-05-19-17-31-42.mp4	11.65 MB
		142115_08_02_3D15_Offset_Work_Planes-2014-05-19-17-31-36.mp4	11.36 MB
		142115_09_02_3D15_Importing_AutoCAD-2014-05-19-17-31-49.mp4	24.9 MB
		142115_09_01_3D15_Projecting_Geometry-2014-05-19-17-31-45.mp4	21.45 MB
		142115_10_06_3D15_Loft_Rails-2014-05-19-17-32-51.mp4	27.79 MB
		142115_10_05_3D15_Loft-2014-05-19-17-32-47.mp4	26.02 MB
		142115_10_02_3D15_Extrude_Base_Feature-2014-05-19-17-32-38.mp4	22.79 MB
		142115_10_04_3D15_Revolve-2014-05-19-17-32-44.mp4	20.49 MB
		142115_10_07_3D15_Sweep-2014-05-19-17-32-54.mp4	16.47 MB
		142115_10_08_3D15_Sweep_Model_Edge-2014-05-19-17-33-40.mp4	14.53 MB
		142115_10_01_3D15_Part_Feature_Introduction-2014-05-19-17-32-35.mp4	13.57 MB
		142115_10_03_3D15_Extrude_To_Next-2014-05-19-17-32-41.mp4	13 MB
		142115_11_01_3D15_Holes-2014-05-19-17-33-45.mp4	29.1 MB
		142115_11_03_3D15_Shell-2014-05-19-17-33-51.mp4	28.75 MB
		142115_11_02_3D15_Fillet_Chamfer-2014-05-19-17-33-48.mp4	12.15 MB
		142115_12_01_3D15_Rectangular_Pattern-2014-05-19-17-34-39.mp4	24.12 MB
		142115_12_02_3D15_Rectangular_Pattern_Parameters-2014-05-19-17-34-43.mp4	16.22 MB
		142115_12_05_3D15_Mirror-2014-05-19-17-34-52.mp4	13.53 MB
		142115_12_04_3D15_Circular_Pattern-2014-05-19-17-34-48.mp4	8.44 MB
		142115_12_03_3D15_Rectangular_Pattern_Path-2014-05-19-17-34-46.mp4	6.57 MB
		142115_13_02_3D15_Creating_iPart-2014-05-19-17-35-06.mp4	29.65 MB
		142115_13_05_3D15_Placing_iFeatures-2014-05-19-17-35-24.mp4	16.38 MB
		142115_13_03_3D15_Placing_iPart-2014-05-19-17-35-11.mp4	14.4 MB
		142115_13_04_3D15_Creating_iFeatures-2014-05-19-17-35-20.mp4	12.86 MB
		142115_13_01_3D15_UnderstandingiPartsiFeatures-2014-05-19-17-35-02.mp4	8.12 MB
		142115_14_03_3D15_Create_Edit_Assembly_Parts_2014Q2-2014-05-19-17-35-36.mp4	24.03 MB
		142115_14_04_3D15_Content_Center_2014Q2-2014-05-19-17-35-41.mp4	22.28 MB
		142115_14_02_3D15_Placing_parts_2014Q2-2014-05-19-17-35-34.mp4	19.07 MB
		142115_14_01_3D15_Assembly_Introduction_2014Q2-2014-05-19-17-35-30.mp4	5.79 MB
		142115_15_06_3D15_Motion_Constraints_2014Q2-2014-05-19-17-36-42.mp4	35.3 MB
		142115_15_01_3D15_Mate_Flush_Constraint_2014Q2-2014-05-19-17-36-19.mp4	25.86 MB
		142115_15_04_3D15_Drive_Constraints_2014Q2-2014-05-19-17-36-30.mp4	25.58 MB
		142115_15_02_3D15_Angle_Constraint_2014Q2-2014-05-19-17-36-23.mp4	14.44 MB
		142115_15_03_3D15_Insert_Constraint_2014Q2-2014-05-19-17-36-25.mp4	10.93 MB
		142115_15_05_3D15_Translational_Constraint_2014Q2-2014-05-19-17-36-39.mp4	9.7 MB
		142115_15_07_3D15_Contact_Sets_2014Q2-2014-05-19-17-36-47.mp4	9.34 MB
		142115_16_02_3D15_Visual_Styles_2014Q2-2014-05-19-17-36-58.mp4	18.84 MB
		142115_16_05_3D15_Lighting_Styles_2014Q2-2014-05-19-17-37-11.mp4	15.6 MB
		142115_16_01_3D15_Materials_Appearances_2014Q2-2014-05-19-17-36-52.mp4	11.57 MB
		142115_16_04_3D15_Perspective_Ground_Reflection_2014Q2-2014-05-19-17-37-06.mp4	11.41 MB
		142115_16_03_3D15_Shadows_2014Q2-2014-05-19-17-37-02.mp4	6.24 MB
		142115_17_03_3D15_Sections_Views_2014Q2-2014-05-19-17-37-26.mp4	23.44 MB
		142115_17_02_3D15_Base_Projected_Views_2014Q2-2014-05-19-17-37-22.mp4	23.35 MB
		142115_17_06_3D15_Auxillary_Views_2014Q2-2014-05-19-17-37-41.mp4	21.66 MB
		142115_17_05_3D15_Breakout_Views_2014Q2-2014-05-19-17-37-35.mp4	17.22 MB
		142115_17_04_3D15_Detail_View_2014Q2-2014-05-19-17-37-31.mp4	13.21 MB
		142115_17_01_3D15_Initial_Drawing_2014Q2-2014-05-19-17-37-18.mp4	10.44 MB
		142115_18_01_3D15_General_Dimension_2014Q2-2014-05-19-17-38-20.mp4	26.08 MB
		142115_18_04_3D15_Baseline_Set_2014Q2-2014-05-19-17-38-39.mp4	18.36 MB
		142115_18_03_3D15_Baseline_2014Q2-2014-05-19-17-38-36.mp4	16.72 MB
		142115_18_02_3D15_Dimension_Precision_2014Q2-2014-05-19-17-38-27.mp4	12.63 MB
		142115_19_01_3D15_Insert_Baloons_2014Q2-2014-05-19-17-38-44.mp4	15.07 MB
		142115_19_02_3D15_Auto_Balloon_2014Q2-2014-05-19-17-38-47.mp4	9.99 MB
		142115_19_03_3D15_Parts_List_2014Q2-2014-05-19-17-38-51.mp4	8.39 MB
		142115_20_01_3D15_Conclusion-2014-05-19-17-38-56.mp4	1.62 MB
		Ex_Files_Inv_2014_EssT.zip	151.99 MB
		AceMerlin.Torrents.nfo	4.81 KB

Description

Inventor 2014 Essential Training with John Helfen

Already up and running? This course is the next step in building your Autodesk Inventor skillset. Author John Helfen takes you through the interface and key processes of this parametric design system, including sketching, part modeling, assemblies, and drawings. Each process works in conjunction with the rest, allowing you to create parts and assemblies and document them in a way that they can be manufactured. Learn how to set up your project file; create and modify geometry; create extrusions, sweeps, and lofts; build parts with placed features and patterns of features; and create iParts and iFeatures. John also covers assembly visualization techniques, drawing views, and balloons and parts lists.

The course was created and produced by John Helfen. We're honored to host this training in our library.

Level: Beginner
Length: 8h 36m
Released: May 19, 2014

Topics include:
Customizing Inventor's menus
Drawing rectangles, arcs, splines, and slots
Moving, copying, and rotating geometry
Trimming, splitting, scaling, and stretching geometry
Creating work planes
Projecting and importing geometry
Creating extrusions, revolves, sweeps, and lofts
Adding holes to a part model
Creating rectangular feature patterns
Creating iParts and iFeatures
Using constraints to position parts
Creating drawing views
Setting dimensions

This tutorial contains updated material from previously released course.

Related Torrents

torrent name	size	seed	leech
Lynda - Inventor 2014 Essential Training Posted by moondookie in Other > Tutorials	846.97 MB	3	3

Sharing Widget

Download torrent

1.56 GB

seeders:11

leechers:11

Lynda.com - Inventor 2014 Essential Training (Updated) {AceMerlin}

All Comments

minipower50

anon says

plz leech guys its a good torrent

facetious at it's best