Solidworks Video Tutorials - SolidProfessor

seeders: 0
leechers: 9
Download torrent
Added on May 14, 2014 by sherryf19in Other > Tutorials
Torrent verified.


Solidworks Video Tutorials - SolidProfessor (Size: 16.95 GB)
 2.Part Exercises - 3.Rose Cover 1.flv43.19 MB
 2.Part Exercises - 1.Handle 1.flv38.39 MB
 3.Creating the Assembly - 2.Final Assembly.flv33.18 MB
 3.Creating the Assembly - 1.Latch Sub-Assembly.flv30.19 MB
 2.Part Exercises - 8.Latch.flv30.17 MB
 2.Part Exercises - 4.Rose Cover 2.flv27.93 MB
 2.Part Exercises - 6.Latch Plate.flv26.72 MB
 2.Part Exercises - 7.Face Plate.flv21.21 MB
 2.Part Exercises - 5.Lock Mechanism.flv18.38 MB
 2.Part Exercises - 2.Handle 2.flv7.7 MB
 1.Introduction - 1.Introduction.flv6.14 MB
 2.Detergent Bottle - 19.Remaining Fillets and Thread.flv40.16 MB
 3.Candle Holder - 18.Scroll on Legs.flv37.32 MB
 2.Detergent Bottle - 16.Creating the Label Inset.flv34.01 MB
 3.Candle Holder - 12.Leaf Details.flv30.63 MB
 3.Candle Holder - 9.Thumb Rest Setup.flv27.73 MB
 2.Detergent Bottle - 4.Creating the Front Surface.flv27.68 MB
 3.Candle Holder - 11.Leaf Free Form Shape.flv27.66 MB
 2.Detergent Bottle - 8.Making the Handle.flv26.88 MB
 2.Detergent Bottle - 12.Blending the Handle Bottom.flv23.75 MB
 3.Candle Holder - 16.Filleting and Patterning the Ivy.flv22.67 MB
 1.Light Bulb - 7.Base Threads.flv33.98 MB
 1.Light Bulb - 4.Fluorescent Tube.flv32.24 MB
 1.Light Bulb - 3.Bulb Base.flv17.98 MB
 1.Light Bulb - 6.Completing the Tube.flv13.72 MB
 1.Light Bulb - 5.Connecting the Tube.flv11.29 MB
 1.Light Bulb - 1.Light Bulb.flv3.82 MB
 1.Light Bulb - 2.Overview.flv1.5 MB
 2.Basic Part Exercises - 2.Mounting Block - Part 2.flv21.89 MB
 3.Basic Assembly Exercises - 1.Tape Case Assembly.flv20.54 MB
 2.Basic Part Exercises - 6.Bracket - Part 3.flv19.63 MB
 2.Basic Part Exercises - 3.Mounting Block - Part 3.flv18.84 MB
 3.Basic Assembly Exercises - 2.Brace Assembly - Part 1.flv16.49 MB
 2.Basic Part Exercises - 10.Curved Housing - Part 3.flv16.28 MB
 2.Basic Part Exercises - 4.Bracket - Part 1.flv16.19 MB
 3.Basic Assembly Exercises - 3.Brace Assembly - Part 2.flv14.82 MB
 2.Basic Part Exercises - 9.Curved Housing - Part 2.flv14.59 MB
 2.Basic Part Exercises - 5.Bracket - Part 2.flv13.05 MB
 2.Exercises - 03.Exercise II - Pipe Reducer.flv41.98 MB
 2.Exercises - 02.Exercise I - Crank Shaft.flv30.79 MB
 1.Simulation - 12.Optimizing a Design.flv19.58 MB
 1.Simulation - 09.Stress and Displacement.flv18.56 MB
 1.Simulation - 06.Applying Loads.flv18.4 MB
 1.Simulation - 05.Applying Fixtures.flv16.22 MB
 1.Simulation - 08.Running the Simulation.flv13.04 MB
 1.Simulation - 10.Factor of Safety.flv10.63 MB
 1.Simulation - 02.Assumptions.flv9.54 MB
 3.Appendix - 02.Split Line.flv8.17 MB
 3.Meshing - 10.Mesh Refinement.flv41.65 MB
 10.Adaptive Methods - 3.The H-Adaptive Method.flv25.98 MB
 3.Meshing - 8.Mixed Shell Solid Mesh.flv25.75 MB
 4.Beam Analysis - 3.Truss Analysis.flv25.33 MB
 11.Temperature Load - 2.Temperature Load.flv24.58 MB
 5.Static Analysis of an Assembly - 4.Refining Contact Conditions.flv24.31 MB
 8.Using Connectors - 6.Bolt Connector.flv23.16 MB
 2.Static Analysis of a Part - 13.Results Displacement.flv23.09 MB
 3.Meshing - 9.Simplifying Geometry.flv22.76 MB
 3.Meshing - 11.Meshing Tips.flv22.14 MB
 4.Electrical Routes - 7.Start and Add to Route.flv39.95 MB
 3.Piping Routes - 9.PID data and import.flv26.9 MB
 6.Creating Route Components - 6.The Component Wizard.flv26.56 MB
 4.Electrical Routes - 17.FromTo Lists and Guidelines.flv25.99 MB
 4.Electrical Routes - 2.Using Standard Cables.flv23.6 MB
 6.Creating Route Components - 9.Custom Elbows - Setup.flv21.53 MB
 4.Electrical Routes - 5.Defining Wires.flv20.65 MB
 6.Creating Route Components - 7.Custom PipeTube - Setup.flv20.44 MB
 6.Creating Route Components - 8.Custom PipeTube - Design Tables.flv19.95 MB
 6.Creating Route Components - 10.Custom Elbows - Design Tables.flv19.64 MB
 2.Assembly Features - 7.Smart Components.flv35.88 MB
 6.Assembly Configurations - 3.Advanced Options.flv25.58 MB
 1.Assembly Structure - 1.Creating Sub-Assemblies.flv24.07 MB
 6.Assembly Configurations - 4.Automatic Part Configurations.flv22.37 MB
 7.Top Down Assembly Design - 6.Inserting a New Component.flv21.87 MB
 5.Troubleshooting Mates - 4.Mate Xpert.flv20.86 MB
 2.Assembly Features - 8.Belts and Chains.flv19.95 MB
 3.Component Patterns - 1.Linear Patterns.flv18.81 MB
 6.Assembly Configurations - 5.Assembly Design Tables - Part A.flv18.73 MB
 6.Assembly Configurations - 6.Assembly Design Tables - Part B.flv17.53 MB
 4.Configurations Part Modification - 5.Part Modification Exercise.flv35.47 MB
 3.Advanced Part Model - 13.Adding Fillets.flv33.63 MB
 6.CSWP Assembly Model - 18.Other Possible Assembly Question Types.flv28.63 MB
 6.CSWP Assembly Model - 14.Rotor In-context Relations 3.flv26.47 MB
 5.CSWA Assembly Model - 5.Mating the Remaining Components.flv26.42 MB
 2.Part Model with Equations - 2.The Central Cylinder.flv26.16 MB
 2.Part Model with Equations - 3.The Top Fork.flv25.03 MB
 6.CSWP Assembly Model - 2.Modeling the First Component.flv24.69 MB
 3.Advanced Part Model - 11.The Top Boss.flv23.79 MB
 3.Advanced Part Model - 6.The First Screw Lug.flv23.27 MB
 3.Sweeps - 9.Threads.flv34.03 MB
 5.Flex Feature - 2.Flex Feature.flv29.98 MB
 1.Advanced Sketching - 07.3D Sketching.flv21.9 MB
 1.Advanced Sketching - 08.3D Sketching with Planes.flv21.29 MB
 2.Advanced Fillets - 2.Variable Radius Fillets.flv20.66 MB
 3.Sweeps - 6.Profile Orientation.flv20.5 MB
 6.Multibody Parts - 8.Additional Techniques.flv18.65 MB
 6.Multibody Parts - 4.Splitting Bodies - Part B.flv18.61 MB
 6.Multibody Parts - 6.Combining Multiple Bodies.flv17.53 MB
 4.Lofts - 02.The Basic Loft.flv17.07 MB
 4.Customizing CAMWorks - 03.User Defined Strategies - A.flv33.61 MB
 2.2.5 Axis Milling - 19.Feature Options.flv28.79 MB
 2.2.5 Axis Milling - 27.Inserting Avoid Areas.flv23.35 MB
 2.2.5 Axis Milling - 11.Simulate Toolpaths.flv22.52 MB
 2.2.5 Axis Milling - 15.Adjusting Operations - Roughing Options A.flv22.23 MB
 2.2.5 Axis Milling - 21.Contour Operations.flv22.08 MB
 2.2.5 Axis Milling - 29.Part Exercise IA.flv20.53 MB
 2.2.5 Axis Milling - 16.Roughing Options B.flv19 MB
 2.2.5 Axis Milling - 17.VoluMill.flv18.08 MB
 2.2.5 Axis Milling - 06.Defining Features Automatically.flv17.69 MB
 1.AutoCAD to SolidWorks Tools - 12.Blocks and Mechanisms.flv31.1 MB
 2.SolidWorks Parts - 7.Extruded Boss.flv21.31 MB
 2.SolidWorks Parts - 4.Circles And Arcs.flv19.42 MB
 4.SolidWorks Drawings - 2.Model View.flv19.08 MB
 3.SolidWorks Assemblies - 4.Adding Mates.flv18.98 MB
 1.AutoCAD to SolidWorks Tools - 10.3D Features.flv18.2 MB
 1.AutoCAD to SolidWorks Tools - 2.What is SolidWorks.flv17.19 MB
 4.SolidWorks Drawings - 1.Introducing Drawings.flv16.56 MB
 2.SolidWorks Parts - 6.Dimensions.flv15.7 MB
 4.SolidWorks Drawings - 6.Bill of Materials.flv15.25 MB
 2.Toolbox - 6.Smart Components.flv31.06 MB
 2.Toolbox - 7.Toolbox and Hole Wizard Database.flv23.65 MB
 2.Toolbox - 5.Harware Stackups.flv21.34 MB
 1.The Design Library - 3.Adding Custom Features to the Library.flv20.25 MB
 2.Toolbox - 2.Setting UpAdding in the Toolbox.flv12.63 MB
 2.Toolbox - 3.Inserting Toolbox Components.flv10.88 MB
 2.Toolbox - 4.Replacing Hardware.flv9.25 MB
 2.Toolbox - 8.Other Tools.flv9.12 MB
 2.Toolbox - 1.Toolbox Overview.flv9.11 MB
 1.The Design Library - 4.Editing and Locating the Library Feature.flv9.1 MB
 08.Weldments - 2.Weld Beads.flv30.19 MB
 01.General Enhancements - 5.Photoview 360.flv26.23 MB
 03.Assemblies - 5.Assembly Defeature.flv21.35 MB
 01.General Enhancements - 3.Display Manager- Decals.flv20.97 MB
 01.General Enhancements - 2.Display Manager- Appearances.flv17.99 MB
 01.General Enhancements - 4.Display Manager-Scenes.flv15.61 MB
 03.Assemblies - 4.Assembly Visualization.flv15.22 MB
 07.Sheet Metal - 5.DXF and DWG Mapping.flv15.2 MB
 10.Weldments - 2.Interface Changes.flv14.98 MB
 10.Weldments - 1.General Enhancements.flv14.97 MB
 1.2011 Sheet Metal - 33.Multibody Sheet Metal Parts.flv27.97 MB
 1.2011 Sheet Metal - 25.Convert to Sheet Metal.flv21.77 MB
 1.2011 Sheet Metal - 11.Miter Flange.flv20.14 MB
 1.2011 Sheet Metal - 24.Creating New Forming Tools.flv19.59 MB
 1.2011 Sheet Metal - 23.Modifying Forming Tools.flv17.57 MB
 1.2011 Sheet Metal - 2.Base Flange - Part A.flv16.05 MB
 1.2011 Sheet Metal - 9.Edge Flange - Part B.flv14.19 MB
 1.2011 Sheet Metal - 8.Edge Flange - Part A.flv13.58 MB
 1.2011 Sheet Metal - 26.Rip Feature.flv12.93 MB
 1.2011 Sheet Metal - 30.Sheet Metal Drawings.flv12.13 MB
 4.Meshing and Thin Wall Optimization - 3.Thin Walls and Minimum Gap Size.flv27.32 MB
 3.Creating a Simple Flow Study - Fluid in a Pipe - 1.Create a Flow Study Using the Wizard.flv24.95 MB
 5.Particle Trajectory - 3.Applying Boundary Conditions.flv23.73 MB
 5.Particle Trajectory - 5.Creating a Particle Study.flv23.69 MB
 13.Transient Heat Transfer - 4.Defining Heat Sources.flv20.93 MB
 6.Fans and Rotating Reference Frames - 9.Analyzing Results.flv18.24 MB
 7.Relative Humidity - 6.Analyzing Results - Cut Plot.flv17.72 MB
 7.Relative Humidity - 2.Setting Up the Analysis.flv17.63 MB
 9.External Flow Around a Sphere - 6.Analyzing Results - Re = 1.flv17.36 MB
 9.External Flow Around a Sphere - 9.2D Analysis - Re = 1000.flv17.19 MB
 3.Turning Exercise - 03.Part Exercise 1C.flv27.21 MB
 2.Turning - 15.Rough Grooving Options.flv26.93 MB
 2.Turning - 11.Simulating Toolpaths.flv26.46 MB
 2.Turning - 02.Defining the Machine.flv19.26 MB
 2.Turning - 13.Roughing Options.flv16.72 MB
 3.Turning Exercise - 02.Part Exercise 1B.flv15.36 MB
 2.Turning - 22.Setting up a Chuck.flv14.93 MB
 2.Turning - 12.Tool Adjustments.flv13.91 MB
 2.Turning - 17.NC Options.flv13.2 MB
 2.Turning - 08.Defining Features Interactively.flv12.39 MB
 1.Weldments - 8.Weld Beads.flv26.04 MB
 1.Weldments - 2.Structural Members.flv19.63 MB
 1.Weldments - 7.Gussets And End Caps.flv18.13 MB
 1.Weldments - 12.Creating Sub-Weldments.flv17.62 MB
 1.Weldments - 9.Cut Lists - Part A.flv17.56 MB
 1.Weldments - 3.Layout Sketches.flv14.48 MB
 1.Weldments - 5.Trim Extend - Part B.flv12.98 MB
 1.Weldments - 4.Trim Extend - Part A.flv12.47 MB
 1.Weldments - 6.Plates And Fillet Beads.flv12.29 MB
 1.Weldments - 13.Creating Custom Profiles.flv11.17 MB
 1.DriveWorksXpress - 5.Creating Rules - Dimensions.flv26.02 MB
 1.DriveWorksXpress - 6.Creating Rules - Features And Properties.flv23.2 MB
 1.DriveWorksXpress - 4.Creating the Input Form.flv19.94 MB
 1.DriveWorksXpress - 3.Capturing SolidWorks Data.flv19.42 MB
 1.DriveWorksXpress - 7.Creating New Variants.flv12 MB
 1.DriveWorksXpress - 2.Starting DriveWorksXpress.flv10.72 MB
 1.DriveWorksXpress - 1.Introduction.flv8.86 MB
 2.Mold Tools - Core and Cavity - 1.Draft Analysis - Part A.flv25.53 MB
 2.Mold Tools - Core and Cavity - 8.Side Cores - Part A.flv20.79 MB
 2.Mold Tools - Core and Cavity - 9.Side Cores - Part B.flv18.53 MB
 2.Mold Tools - Core and Cavity - 7.Creating the Mold.flv18.24 MB
 3.Fastening Features - 5.Lip and Groove.flv15.39 MB
 3.Fastening Features - 1.Mounting Boss.flv12.78 MB
 3.Fastening Features - 4.Vent Feature.flv11.17 MB
 3.Fastening Features - 3.Snap Groove.flv11.11 MB
 2.Mold Tools - Core and Cavity - 5.Shut-Off Surfaces.flv8.69 MB
 2.Mold Tools - Core and Cavity - 3.Scale.flv8.1 MB
 2.DimXpert - 11.DimXpert Exercise - Part I.flv25.11 MB
 2.DimXpert - 2.Auto Dimension Scheme.flv22.02 MB
 3.TolAnalyst - 7.TolAnalyst Exercise.flv20.28 MB
 2.DimXpert - 12.DimXpert Exercise - Part II.flv18.86 MB
 2.DimXpert - 10.Pattern Feature.flv13.16 MB
 3.TolAnalyst - 5.Analyzing the Results.flv12.89 MB
 2.DimXpert - 7.Tolerance Status.flv12.31 MB
 3.TolAnalyst - 4.Assembly Constraints.flv10.6 MB
 1.Course Introduction - 1.Introduction.flv9.46 MB
 2.DimXpert - 8.DimXpert Options.flv9.08 MB
 5.Parts - 07.Appearances.flv24.67 MB
 3.Sketched Features - 2.Extruded Boss.flv21.31 MB
 5.Parts - 04.Design Intent.flv20.01 MB
 2.The Sketcher - 04.Circles & Arcs.flv19.42 MB
 6.Assemblies - 05.Adding Mates.flv18.98 MB
 4.Applied Features - 02.Fillets.flv18.27 MB
 6.Assemblies - 17.Exploding Assemblies.flv17.49 MB
 5.Parts - 06.Symmetry B.flv16.75 MB
 3.Sketched Features - 8.Loft.flv16.27 MB
 5.Parts - 15.Configurations - Table.flv16.04 MB
 1.2011 Intro to eDrawings - 1.eDrawings Overview.flv24.23 MB
 1.2011 Intro to eDrawings - 4.Professional and Premium Options.flv19.69 MB
 1.2011 Intro to eDrawings - 3.Additional Options and Saving as HTML.flv18.79 MB
 1.2011 Intro to eDrawings - 2.Embedding and Sharing eDrawings files.flv14.71 MB
 1.File Management - 2.References.flv23.4 MB
 1.File Management - 6.Document Revisions - Part B.flv22.09 MB
 1.File Management - 1.File Relationships.flv20.84 MB
 1.File Management - 3.Renaming Parts - Save As.flv19.42 MB
 1.File Management - 4.Renaming Parts - SolidWorks Explorer.flv12.99 MB
 1.File Management - 7.Reloading and Replacing.flv11.96 MB
 1.File Management - 5.Document Revisions - Part A.flv6.62 MB
 2011 Drawings - 21.BOMs - Advanced Options.flv23.12 MB
 2011 Drawings - 02.Model View.flv19.08 MB
 2011 Drawings - 01.Introducing Drawings.flv16.56 MB
 2011 Drawings - 19.Note Annotations.flv15.23 MB
 2011 Drawings - 20.Bill of Materials.flv15.06 MB
 2011 Drawings - 25.Custom Sheet Formats.flv14.99 MB
 2011 Drawings - 14.Driving Dimensions.flv14.54 MB
 2011 Drawings - 24.Custom Templates.flv13.7 MB
 2011 Drawings - 15.Driven Dimensions.flv12.67 MB
 2011 Drawings - 05.Section View.flv12.32 MB
 1.Parts - 10.Extruded Boss.flv21.31 MB
 1.Parts - 05.Circles & Arcs.flv19.42 MB
 3.Drawings - 2.Model View.flv19.08 MB
 2.Assemblies - 4.Adding Mates.flv18.98 MB
 3.Drawings - 1.Introducing Drawings.flv16.56 MB
 1.Parts - 07.Dimensions.flv15.7 MB
 3.Drawings - 6.Bill of Materials.flv15.25 MB
 1.Parts - 03.Lines.flv15.18 MB
 1.Parts - 06.Geometric Relations.flv14.22 MB
 3.Drawings - 3.Section View.flv12.32 MB
 3.Managing Assemblies - 7.As Built vs. Latest.flv20.13 MB
 2.Managing Parts - 8.Making Revisions.flv18.88 MB
 3.Managing Assemblies - 3.Checking In a New Assembly.flv18.47 MB
 2.Managing Parts - 3.Checking In a New Part - II.flv18.1 MB
 3.Managing Assemblies - 9.Toolbox - Without Revision Control.flv16.73 MB
 3.Managing Assemblies - 11.Collaborative Environments.flv15.44 MB
 5.Managing Other Filetypes - 1.SolidWorks Explorer.flv14.77 MB
 4.Managing Drawings - 4.Assembly Drawing Changes.flv14.4 MB
 5.Managing Other Filetypes - 4.Adding Attachments.flv11.92 MB
 2.Managing Parts - 10.Document Information.flv11.78 MB
 1.Surfacing - 21.Freeforms - Part B.flv19.7 MB
 1.Surfacing - 3.Basic Surfaces.flv16.31 MB
 1.Surfacing - 20.Freeforms - Part A.flv15.87 MB
 1.Surfacing - 6.Ruled Surface - Part B.flv15.19 MB
 1.Surfacing - 8.Knit Surfaces.flv14.29 MB
 1.Surfacing - 15.Filled Surface.flv13.92 MB
 1.Surfacing - 14.Surface to Solid Conversion.flv12.96 MB
 1.Surfacing - 9.Trimming Surfaces - Part A.flv11.85 MB
 1.Surfacing - 10.Trimming Surfaces - Part B.flv10.99 MB
 1.Surfacing - 22.Boundary Surfaces.flv9.87 MB
 1.3DVia Composer - 9.Update Files.flv15.68 MB
 1.3DVia Composer - 10.3DVia Composer Player.flv12.92 MB
 1.3DVia Composer - 1.Get Started.flv12.92 MB
 1.3DVia Composer - 7.Assembly Instructions.flv12.87 MB
 1.3DVia Composer - 3.High Resolution Images.flv10.5 MB
 1.3DVia Composer - 5.Exploded Views.flv10.07 MB
 1.3DVia Composer - 8.Annotations.flv9.72 MB
 1.3DVia Composer - 4.The Digger.flv8.25 MB
 1.3DVia Composer - 6.Vector Line Art.flv6.73 MB
 1.3DVia Composer - 2.Create Views.flv3.11 MB
 2.Examples - 03.Exercise II - Pipe Reducer.flv56.2 MB
 2.Examples - 02.Exercise I - Crank Shaft.flv38.64 MB
 1.SimulationXpress - 13.Optimizing a Design.flv26.05 MB
 1.SimulationXpress - 06.Applying Loads.flv24.28 MB
 1.SimulationXpress - 05.Applying Fixtures.flv22.78 MB
 1.SimulationXpress - 10.Interpreting Results - Stress and Displacement.flv22.14 MB
 1.SimulationXpress - 09.Running a Simulation.flv17.27 MB
 1.SimulationXpress - 11.Factor of Safety.flv14.28 MB
 1.SimulationXpress - 02.Assumptions.flv10.41 MB
 1.SimulationXpress - 12,Output and Reports.flv10.34 MB
 1.Parts - 10.Extruded Boss.flv49.28 MB
 1.Parts - 05.Circles and Arcs.flv43.01 MB
 1.Parts - 06.Geometric Relations.flv36.56 MB
 1.Parts - 07.Dimensions.flv34.49 MB
 1.AutoCAD to SolidWorks Tools - 12.Blocks and Mechanisms.flv33.99 MB
 1.Parts - 03.Parts.flv33.4 MB
 1.Parts - 09.Convert Entities.flv24.48 MB
 1.Parts - 02.The Sketcher.flv23.31 MB
 3.Drawings - 02.Model View.flv22.74 MB
 1.AutoCAD to SolidWorks Tools - 10.3D Features.flv21.32 MB
 6.Sheet Metal - 03.Forming Tools.flv41.04 MB
 9.Flow - 03.Tracer Studies.flv39.6 MB
 3.Parts and Features - 06.Equations.flv35.22 MB
 3.Parts and Features - 05.Costing.flv28.98 MB
 4.Assemblies - 01.Large Design Review.flv27.63 MB
 9.Flow - 04.Results Enhancements.flv22.51 MB
 8.Simualtion - 01.Beams.flv22.06 MB
 1.Fundamentals - 01.Interface.flv21.66 MB
 3.Parts and Features - 02.Multibody Exploded View.flv19.81 MB
 5.Drawings and Detailing - 04.Balloons.flv19.55 MB
 1.Drawings - 14.BOMs - Advanced Options.flv29.44 MB
 1.Drawings - 02.Model View.flv22.74 MB
 1.Drawings - 17.Magnetic Lines.flv22.54 MB
 1.Drawings - 01.Intro to Drawings.flv20.89 MB
 1.Drawings - 27.Custom Properties and Parametrlc Notes.flv19.55 MB
 1.Drawings - 13.Bill of Materials.flv18.95 MB
 1.Drawings - 24.Note Annotations.flv18.49 MB
 1.Drawings - 16.Balloons.flv17.35 MB
 1.Drawings - 19.Driving Dimensions.flv17.03 MB
 1.Drawings - 25.Create Custom Templates.flv15.62 MB
 3.Drawings - 06.Bill of Materials.flv18.95 MB
 2011-UpdateTraining.zip125.4 MB
 2012-UpdateTraining.zip61.38 MB
 2011-AdvancedAssemblies.zip44.85 MB
 2011-SolidWorksRouting.zip35.91 MB
 2011-AdvancedParts.zip26.35 MB
 2011-CaseStudies-AdvancedSurfacingModels.zip23.52 MB
 2012-CoreConcepts.zip21.37 MB
 2011-CoreConcepts.zip21.37 MB
 2011-CaseStudy-BasicMechanisms.zip11.63 MB
 2011-MoldTools.zip11.58 MB
 V118Q1.flv54.32 MB
 V100Q1.flv39.67 MB
 V114Q1.flv31.84 MB
 V97Q1.flv30.33 MB
 V117Q1.flv27.88 MB
 V110Q1.flv27.51 MB
 V116Q1.flv23.24 MB
 V112Q1.flv22.6 MB
 V95Q1.flv22.04 MB
 V5Q2.flv21.56 MB
 2 MB
 2 MB
 2 MB
 1.99 MB
 1.99 MB
 1.99 MB
 1.99 MB
 1.99 MB
 1.98 MB
 1.98 MB
 1.98 MB
 1.98 MB
 1.98 MB
 1.98 MB
 1.97 MB
 1.97 MB
 1.97 MB
 1.97 MB
 1.97 MB
 1.97 MB
 1.97 MB
 1.97 MB
 1.97 MB
 1.97 MB
 1.96 MB
 1.96 MB
 1.96 MB
 1.96 MB
 1.96 MB
 1.96 MB


Description

enjoy the videos and learn 3d designing . enjoy engineers

Related Torrents

torrent name size seed leech

Sharing Widget


Download torrent
16.95 GB
seeders:0
leechers:9
Solidworks Video Tutorials - SolidProfessor